Land-pride RCR1572 Bedienungsanleitung PDF herunterladen (Seite 11)

Section 1: Assembly and Set-Up

12/28/05

RCR1542, RCR1548, RCR1560 and RCR1572 Rotary Cutters 312-556M

Land Pride

Table of Contents

Driveline Installation

Refer to Figure 1-2:

1. Remove the snap ring (#1) from the gearbox input

shaft. Slide the driveline (#2) on to the gearbox shaft

and replace the snap ring to the gearbox shaft. The

snap ring is for extra security in case the shear bolt

(#3) should break. Align the holes in the driveline

withthe hole inthe gearboxinput shaftand insertthe

1/2” x 3 1/2” long bolt (#3) and secure with the 1/2”

nut (#4) and 1/2” jam nut (#5).

2. Secure the chain on the driveline to the driveline

cone to restrict outer shield from rotating.

Driveline Installation

Figure 1-2

16385

3-Point Hook-Up

Refer to Figure 1-3:

DANGER

Tractor hook-up can be hazardous to your health or that of

your helper. Do not allow anyone to stand between the _____

and the tractor during hook-up operations. Do not operate the

hydraulic 3-point lift controls while someone is directly

behind the tractor.

1. Slowly back the tractor up to the cutter and use the

tractor’s 3-point hydraulic control to adjust the lower

linkarms up ordownto match theheight of thecutter

hitch pins.

2. Slide the the lower link arms hitch link holes onto the

cutter hitch pins.

3. Install a linch pin or other fastener (supplied by

customer)through the hitchpin hole tolockthe lower

links into position.

4. Connectthe toplinktotheupper pivothitchusingthe

3/4" clevis pin supplied.

Tractor Hook-Up

Figure 1-3

16386

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Keine Kommentare

Land-pride RCR1572 Bedienungsanleitung Seite 11